Type 1
Type 1 Tap
Type 2
Type 3
Type 7
Type 13
Type 14
Type 15
Type 17- Type 1 - Alnico 5 Standard Upgrade - White String Finish, Bottom Plate
- Type 1 Tap - Esquire players rejoice! Two pickups in one, low & high outputs. If used in conjunction with a neck pickup, and a re-wire of a standard Tele switch, the middle hum cancelling position is more balanced - White String Finish, Bottom Plate
- Type 2 - Low impedance with clear and open sound. Very good for Nashville and pedal-steel-type bending - Black Tape Finish, Bottom Plate
- Type 3 - Alnico 2 - Darker somewhat colored sound - White String Finish, Bottom Plate
- Type 7 - Alnico 3 - Mid range sounding - White String Finish, Bottom Plate
- Type 13 - Alnico 2 - This pickup is designed for heavier Tele's, "magnet distortion" has the feel of bass response - White String Finish, Bottom Plate
- Type 14 - Differntly voiced Type 1 - White String Finish, Bottom Plate
- Type 15 - Very Low impedance version of Type 3 - Black Tape Finish, Bottom Plate
Aero Telle Bridge Pickup
Depending Upon Options (USD)
$140.00 - $250.00
None
- Green Wire "plate-ground" - The bridge pickup plate is the bridge ground for original Tele guitars. Tele pickups, except Aero, attach the (-) signal wire to the plate, i.e., pickup ground is also bridge ground. Aero Telle pickups separate signal return (-) from bridge ground by adding a 3rd wire. This prevents stray ground signal from entering the pickup (-). Additionally if AC hot is accidentally applied to ground, it's not also applied to the pickup.
- Yellow Wire "tap" - Only present on coil tap pickups
- Standard Wiring
WHITE : (+) Positive BLACK : (-) Negative (Ground) GREEN : Bottom Plate Ground (Bridge Ground) - Coil Tap Wiring
WHITE : (+) Positive YELLOW : Coil Tap (+) Positive BLACK : (-) Negative (Ground) GREEN : Bottom Plate Ground (Bridge Ground)
None
None